Blog

Enterprise ITSM Migration to ServiceNow: How Large Organizations Move Off Legacy Platforms Without Disruption

  • Last Updated: Nov 17, 2026
  • 19 min read

Share on

Enterprise ITSM Migration to ServiceNow: How Large Organizations Move Off Legacy Platforms Without Disruption
  • Treat migration as a business transformation. Review processes and customizations before rebuilding them in ServiceNow.
  • Move only the data the business needs. Protect required history and audit records while avoiding unnecessary migration of low-value data.
  • Plan continuity into every phase. Validate integrations, define open-ticket handling, and use clear go/no-go criteria.
  • Measure outcomes after go-live. Service quality, user adoption, automation, and successful legacy retirement demonstrate whether the migration delivered value.

Introduction

The business will continue to rely on IT Service Management solutions to support its staff members. This allows them to log incidents, raise service requests, manage changes, gain access to knowledge, and obtain assistance if their vital technology assets fail.

As ITSM platforms evolve, they can become unwieldy. This can happen through years of adding additional workflows, using other tools alongside ITSM, having duplicate data, and complex integrations. All can add to your cost of change within your existing solution.

You may have different departments running different processes and struggle to get accurate reporting across your different regions and technology stacks.

By migrating to ServiceNow, you can clean up your current process and provide better self-service options for your users. It will also allow you to explore further business processes to automate using ServiceNow.

Migrating to ServiceNow at the enterprise level is never going to be easy. You may have many users on your existing solution, multiple service desks, business processes, controls, and a wide variety of integrations into other tools that support identity, monitoring, asset management, etc. If anything goes wrong during the migration, you could suffer a period of downtime.

It’s about migrating to ServiceNow and not duplicating the same complex process you currently have.

There are many areas of consideration when migrating your ITSM solution to ServiceNow. You will want to retain business functionality and clean up areas that aren’t serving your business well.  Giving you a stepping stone to take forward with your new solution.

In this post, we will discuss how to migrate your enterprise ITSM solution to ServiceNow.

Why Enterprises Are Migrating Their Legacy ITSM Solution to ServiceNow

Many companies will find that their legacy solution is working fine for them. However, it may start to show its age, and you’ll find yourself needing to spend more time fixing the tool.

Fragmented Tools and Inconsistent Processes

Companies over the years can use multiple tools that cover Incident Management, Change, Problem, and Service Request Management.

You will have found ways of working that may differ from department to department or location. Having inconsistent process flows between users or teams to raise Incidents. Or having various levels of approval to Complete Changes and different views of what constitutes an Incident Category.

By migrating to ServiceNow, you can ensure you have more standardized process flows across your organization. Depending on your setup and use cases.

Rising Maintenance and Customization Costs

Having a large amount of custom-built features within your legacy ITSM solution can be costly to maintain. Even the simplest of changes may require developers and lead to long lead times.

By moving to ServiceNow, you can look at these custom features and see what works for you and what may need to be enhanced or removed from your environment.

 Reporting and Understanding Your Business Services

With different tools in place, you may struggle to gain a holistic view of your environment. How your incidents are trending, what issues are causing repeat calls, or what business services may be affected during a major incident.

ServiceNow can provide reporting that gives you more visibility into your services if implemented correctly.

Limited Service Visibility

People want easier ways to consume services from their IT teams. Whether that be raising an IT Service request or gaining knowledge about issues they may have faced previously. IT teams want to spend more time making sure the service they provide is working rather than doing admin tasks.

ServiceNow will allow you to configure workflows that support these users and help streamline your current processes.

What Makes Enterprise ITSM Migration Complex?

As mentioned earlier, your legacy ITSM solution will most likely have various considerations that you should be aware of.

  • Data: There will be tons of data within your legacy solution. From Incident and Request data, you will have years’ worth of changes, CIs, and possibly knowledge.
  • Processes: Your processes may have many different ways of working. There may be undocumented workarounds or complex process flows in place that only one person knows about.
  • Integrations: Your ITSM solution will probably integrate with other solutions that your business relies on. From Monitoring to HR systems, you will need to consider all the different tools in your stack that interact with your ITSM tool.
  • Locations: Depending on your business, you may have different locations that run different business hours. You may need to factor this into how your processes will be carried out and who will be supporting your users.
  • Current live issues: You are always going to have incidents and service requests coming into your environment. These can’t be left alone while you wait to migrate to ServiceNow. You will have urgent changes that need to be made or critical incidents that need resolving.
  • Users: Once you’ve migrated to ServiceNow, your users will need to know what has changed and how this impacts them.

You will want to consider all these areas when developing your migration path. Don’t just look at replacing one piece of technology with another, as this can lead to more problems down the line.

A Step-by-Step Approach to Enterprise ITSM Migration to ServiceNow

Step 1: Establish Objectives, Ownership, and Success Measures

First, you’ll want to understand why you’re looking to migrate to ServiceNow. Do you have too many ITSM instances? Are you struggling with reporting? Or maybe your current solution isn’t providing good self-service options.

Once you’ve established what you want to achieve from migrating to ServiceNow. Set KPI’s that you want to meet with your new solution. Some may include Uptime during your migration or ensuring that Service Requests are completed quicker than before.

Make sure you have a Governance Board that will drive the project. Have key members in place that can help drive decisions throughout your migration.

From here, you want to appoint people to be accountable for the migration. Whether that be data migration, integration, or process owners. It’s important to have a Steering Committee that can make decisions and move the project along when needed.

At the end of this stage, you should have someone who can lead the migration and have set objectives that you will meet with your migration.

Step 2: Discover the Legacy Environment

Once you’ve identified your key members and have started the project. You’ll want to find out everything about your current solution. This may include looking at the various configurations you have in place, data, integrations, workflows, etc.

Look at how you currently manage your Incidents. Do you follow major incident management best practices? How are you managing your changes, and are your approvals documented?

Do you use problem management, and if so, how is that currently working for you? How are you managing your Service Requests?

Are you currently managing your assets, and how are they being linked to your ITSM tool? Are you managing service levels, and how are they being met?

Look at all of these processes and understand what you have in place currently. Identify where each of these processes works and where you have gaps.

Document these and build a list of things you would like to migrate. You will want to migrate your processes that are beneficial to your business and try to fix any broken ones you currently have.

Once you have a list of all of these, make sure they are reviewed by your key stakeholders and can be actioned.

By the end of this stage, you will have identified all current state processes and what needs to be considered when migrating.

Step 3: Rationalize Processes Before Configuring ServiceNow

The biggest mistake you can make when migrating to ServiceNow is trying to migrate all your processes as they are. Yes, this will mean your users have familiar tools and process flows to follow.

However, it can cause your organization to build on top of current broken practices. Leading to more time spent supporting the tool and cleaning up data that may not even be required.

When looking at the processes you have in place, ask yourself the following.

  1. Is this process something we want to keep?
  2. Does the process work and allow the users to achieve what they need to?
  3. Can we make this process work better by simplifying or standardizing it?

Should we migrate this now, or can we work on this later?

Once you have looked at all the processes, you want to create one that can be used by all of your users and business units. Some will require additional tweaks that can be discussed with the relevant parties.

An example would be your Incident Categories. You may have multiple categories spread across your different environments that don’t make sense or aren’t used correctly by your users.

Having a standard way of logging incidents will help you when reporting on them and allow for more automation down the line.

Make sure when migrating to ServiceNow you look at best practices and how to improve on your current process.

Step 4: Define a Selective Data Migration Strategy

Depending on how much data you have stored on your current system, you may want to migrate some or all of it to ServiceNow. This could be incident, change, and request data along with any historical data.

You may not want to bring across all of your data, as this could result in larger database sizes and more time spent on migration. There may be broken links or old data you don’t require in your new environment.

Take a look at the table below to help with identifying what you want to migrate.

Data category Recommended evaluation
Users, groups, and locations Establish accurate foundation data and ownership before loading dependent records
Active incidents and requests Determine whether records must be migrated, completed in the legacy tool, or transferred through a controlled transition
Historical incidents and changes Assess operational reporting, audit, legal, and investigation requirements
Knowledge articles Review accuracy, ownership, duplication, relevance, and expiry before migration
CMDB and asset records Validate relationships, class mappings, data quality, and alignment with the target model
Attachments and detailed history Confirm whether each item must be available in the target platform or can remain in an accessible archive
SLA definitions and rules Rebuild and validate against the target service model where appropriate rather than assuming historical configuration can be copied directly

 

Make sure you have a plan to retain any data you don’t want to migrate to ServiceNow. It may still be useful to have this information at hand. But you may want to keep it separate from your production environment.

Identify what data you do want to migrate and create mappings that will ensure your data lands in the correct area within ServiceNow. You will want to have a process in place to test and validate that your data is correct.

You may have some challenges migrating your data from your legacy solution. Check out our guide to Migrating to the CMDB in ServiceNow.

Step 5: Design the Target ServiceNow Architecture

You will want to map out your new architecture on ServiceNow. This will include your instance(s), roles, groups, processes, catalog items, knowledge base, reporting, and integrations.

Deciding how many instances you want to run will depend on your current setup and use cases. You may want to migrate all your current instances to one, or you may have a need to have multiple.

Ensure your use of the Common Service Data Model is planned out and how this will fit into your new architecture.

ServiceNow has laid out how to implement the CSDM in your instance. Check out more here.

Step 6: Rebuild and Validate Integrations

Your Legacy ITSM solution will have a range of Integrations that communicate to and from your environment. These can come from identity providers, monitoring tools, emails, etc.

You will want to identify which integrations you want to carry over to ServiceNow and how they can be rebuilt. Some may have simpler methods of communication that you can take advantage of within ServiceNow.

Map out your new Integrations and make sure you test them to make sure they work as you expect. It’s easy to get stuck on a single integration and miss how it affects your overall processes.

Have end-to-end tests to validate that everything is communicating correctly and meeting your expectations. You may have issues if an integration doesn’t pass back certain data that your process may rely on.

Step 7: Test business Processes, Data, and Operational Readiness

Test your business processes to make sure your data will land correctly. Check that you have all your fields mapped and will bring your history over if you require it.

Test your Integrations and make sure your systems are communicating as you would expect them to. Run your Security tests to ensure everyone has the right permissions in place. Perform Load testing on your environment to see how your data performs under high-volume scenarios.

Get your users involved to make sure the environment is doing what they expect it to and they feel comfortable using the platform. Once you’ve tested your platform, you can begin to move data over to your new environment.

Always have a rollback plan in place in case you run into issues that you weren’t expecting.

Step 8: Plan Cutover to Protect Service Continuity

As stated earlier, you are going to have live incidents that are in flight when you start the cutover process. Decide what you will do with these and how you will manage them on both systems.

Have a migration cutover plan that identifies what you are migrating and how you will move the data over. When are you going to stop sending data into your legacy solution, and what do you need to do to get ready?

  1. Identify when your freeze will start and who is responsible.
  2. Ensure all open data is accounted for.
  3. Check user permissions are set up correctly.
  4. Turn on your Integrations and communications.
  5. Smoke test your key business processes.
  6. Make sure your Service Desk has all they need to start receiving work.
  7. Communicate your move and what support they will receive.
  8. Once you’re ready, call it done!

Decide how you will manage your current open incidents. Do you want to migrate them across or complete them on your legacy solution? Whatever route you choose will affect your users, so plan for this.

Try to avoid running two environments for too long; it can become a nightmare to manage. Ensure you have one that takes precedence and know when you’ll turn off the legacy system.

As always, have a recovery plan and make sure everyone understands how you will revert. If you start entering data into ServiceNow, you’ll need to make sure you can roll back your environment if required.

By the end of your migration, you should have your users onboarded and be ready to start using ServiceNow.

Step 9: Manage Change and Adoption Across the Enterprise

You’ve got your users migrated to ServiceNow; now it’s time to make sure they know how to use it. Everyone will be impacted by this migration, so ensure you have a change management plan in place.

You want your Service Desk to know what’s changed and what they need to do differently to support their users. Same for anyone who approves changes or is a Service Owner.

Make sure you have communications in place prior to your migration and continue to communicate with your users. Train them on how to raise their Incidents and service requests. Show them where to find Knowledge and how it can help you with your processes.

Once you’ve rolled out your migration, continue to engage with your users to find out what can be improved. Look at how they are consuming the platform and address any issues they may have.

Your migration is not over once your users have started using ServiceNow.  Keep improving your solution to make sure it supports your users and will grow with your business.

How to Measure Migration Success

You will want to identify ways that you can measure the success of your migration. Below are some examples that you can track on your platform.

Measurement area Example measures What it indicates
Service continuity Critical incidents during cutover, service availability Whether the transition protected operations
Data quality Reconciliation exceptions, duplicate records, broken references Whether migrated data can be trusted
Process effectiveness Routing accuracy, request fulfilment time, change success rate Whether the target workflows perform as intended
User experience Self-service adoption, repeat contacts, user feedback Whether employees can use the new service model
Operational efficiency Manual effort, repeat incidents, automation success Whether the new environment reduces avoidable work
Legacy retirement Retired interfaces, decommissioned systems, closed contracts Whether the organization is realizing the intended simplification

Set targets that you want to meet and continue to monitor your platform to see if you’ve achieved them.

If you’ve seen improvements, see what helped you achieve that goal and use those to further improve your environment. If you haven’t, then look at why and work towards your goals.

How Hexaware Supports Enterprise ITSM Migration to ServiceNow

As mentioned, Hexaware has extensive knowledge of ServiceNow and managing IT infrastructure. Helping customers migrate from legacy solutions and improve their IT Service Management.

Our focus on Enterprise ITSM allows us to standardize processes and migrate our clients to better platforms. We can help improve customer experience and provide better support for your staff.

We recently did a case study on how we helped a customer with their legacy IT Service Management tools.

By helping this customer we were able to retire multiple tools and bring them together on to one platform. Converging instances and streamlining SLA’s.

Migrating them to ServiceNow, we were able to move over complex SLA’s and improve on their Integration’s.

Within two years we were able to migrate four separate instances of ITSM to one ServiceNow Instance. You can read the full case study here.

Another Case study that highlights one of our successful migrations. By helping migrate this customers Ivanti ITSM solution to ServiceNow we improved many of there areas.

We helped migrate Foundational data and Transactional data, developed integrations and helped build better Service Catalogue items. By leveraging automated discovery, we improved their product discovery and gained efficiencies of around 40%. You can read more about this Customer here. Click here for our full case study.

There are many things to consider when migrating to ServiceNow from your legacy ITSM solution. Make sure you plan on all of these areas to ensure your success with your new platform.

Hexaware has experience with many Enterprise ITSM Migrations so reach out to us, and we can help plan on your migration path.

Frequently Asked Questions

It is the process of moving IT service management processes, selected data, integrations, and operational workflows from one or more legacy ITSM platforms to ServiceNow. It typically includes process redesign, platform configuration, data migration, testing, cutover, user adoption, and legacy system retirement.

The timeline depends on the number of legacy platforms, process complexity, data volumes, integrations, regulatory requirements, and the degree of consolidation. A focused deployment may be delivered differently from a program combining multiple highly customized instances. Establish a realistic schedule after discovery and dependency assessment.

No. Each data category should be assessed against operational, reporting, audit, legal, and retention requirements. Some records may need to move, while other historical information can remain in a secure archive or read-only repository. Active records require an explicit continuity plan.

Use a detailed cutover runbook, reconcile final data changes, validate critical integrations, test user access, and establish clear go/no-go criteria. Plan how open incidents and requests will be handled, communicate the transition, and provide enhanced support immediately after launch.

Most enterprises benefit from reviewing processes before migration. Standardize workflows where practical, preserve justified business or regulatory variations, and avoid reproducing customizations that no longer serve a valid purpose. The target should reflect the future operating model.

The Configuration Management Database helps represent configuration items and their relationships. Accurate CMDB data supports impact analysis, change assessment, and service visibility. Organizations should validate data quality, relationships, class mappings, and ownership rather than copying the legacy CMDB without review.

Retire the legacy platform only after validating required data retention, completing integration changes, confirming business acceptance, and obtaining approval from relevant owners. The decommissioning plan should include access removal, license and contract closure, and documented retention controls.

Measure service continuity, data quality, process effectiveness, user experience, operational efficiency, and legacy retirement. Establish a baseline before the migration and review results after stabilization to identify where additional improvements are needed.